Skip to content
Backup Power IQ
Calculated backup-power guide

Anker SOLIX C1000 Gen 2 vs EcoFlow DELTA 3 Plus: backup power comparison

Indexability score 86/100Recalculated from current Backup Power IQ dataMethodology
Anker SOLIX

Anker SOLIX C1000 Gen 2

1,024 Wh2,000 W AC600 W solar11.3 kg
Check price at Amazon →
VS
EcoFlow

EcoFlow DELTA 3 Plus

1,024 Wh1,800 W AC1,000 W solar12.5 kg
Check price at Amazon →

The Anker SOLIX C1000 Gen 2 and EcoFlow DELTA 3 Plus each list 1,024 Wh capacity, 90% usable capacity, LiFePO4 chemistry, 4,000-cycle life and a five-year warranty. The Anker provides higher continuous output at 2,000 W and weighs less at 11.3 kg; the EcoFlow lists a higher surge rating of 3,600 W.

The EcoFlow lists greater solar input at 1,000 W and supports up to 5,000 Wh of expansion, while the Anker lists 600 W solar input and no expansion capacity. Supplied data includes no prices or actual load requirements, so a value judgment or workload-specific winner is not possible.

  • Choose based on output: The Anker’s 2,000 W continuous rating favors higher sustained loads, while the EcoFlow’s 3,600 W surge rating may better suit loads with higher startup demand.
  • Choose based on recharging and growth: The EcoFlow has the higher solar-input rating and listed expansion support; the Anker lists faster AC charging at 1,600 W versus 1,500 W.
  • Check the missing context: Both list UPS functionality with a 10 ms transfer time, but the evidence does not provide prices or your appliance loads, so cost-per-Wh and runtime comparisons are insufficient.

This comparison uses current Backup Power IQ specification and offer data. It is designed to show measurable tradeoffs rather than declare a universal winner.

Specification comparison

Metric Anker SOLIX C1000 Gen 2 EcoFlow DELTA 3 Plus
Capacity (Wh) 1,024 1,024
Continuous AC (W) 2,000 1,800
Surge (W) 3,000 3,600
Solar input (W) 600 1,000
Weight (kg) 11.3 12.5
Cycle life 4,000 4,000
Max expansion (Wh) 0 5,000
Warranty (years) 5.0 5.0

Price and value context

Those figures are not enough by themselves: inverter output, motor surge, solar acceptance, weight and expansion support can matter more than raw $/Wh for a particular outage plan.

Compare them against my actual loads